Pin Insulation Heat Tester

Aplikasi: Pin insulation heat tester.
Untuk menguji ketahanan konektor pin isolasi plug/steker terhadap panas yang tidak normal.


Untuk menentukan pengujian ketahanan terhadap panas abnormal isolasi lengan pin konektor, di menurut IEC 60884-1 angka 40, alat uji ini terdiri dari isolasi piring A dan bagian logam B. Antara dua bagian ruang udara dari 3 mm harus disediakan dan jarak ini harus diperoleh melalui cara-cara yang tidak merugikan sirkulasi udara di sekitar pin.

Standard Outfit:
1 isolasi piring A, yang bulat dan datar, tebal 5 mm, memiliki diameter sama dengan dua kali maksimum dimensi yang diizinkan keterlibatan wajah steker diberikan dalam lembar standar yang relevan,

5 bagian logam B, kuningan, panjang minimal 20 mm, bentuk yang sama seperti garis maksimum steker menurut lembar standar yang relevan,

1 thermo kopel, tipe K, dimasukkan pada jarak 7 mm dari permukaan depan bagian logam B dalam posisi simetris 

Spesifikasi:
Model: CPL-A40.1
Sumber daya: AC220V, 50Hz
Dimensi: 450 x 350 x 350
Gap antara papan isolasi dan logam B: 3 mm
Jarak antara logam thermo pasangan & B: 7 mm
Logam lubang baut B: lebih dari 0,1 mm  
Sampel Uji: Plug, Steker, dsb.
Sesuai standar: SNI IEC 60884-1 Gambar 40

---

Sales & Online Support:

Local Phone/Fax:  021-2984-1193,  GSM Celluler: 0812-1312-5950 / 0899-0070-146 

http://www.alatuji-sni.com, info@alatuji-sni.com

Share:

Read More

Cord retention tester

Aplikasi:
Menguji kekuatan retensi kabel terhadap daya tarikan/beban mekanis & untuk memeriksa efektivitas retensi kabel dari kabel senur.
Ketegangan kabel dikendalikan dengan menggantung bobot dan dapat disesuaikan dengan penambahan 10N sesuai dengan massa atau arus dari sampel yang diuji. Mesin akan otomatis berhenti ketika jumlah dari tarikan selesai.

Spesifikasi:
Model: CPL-F20.A
Sumber daya: AC220 V, 50Hz
Dimensi (mm): 550 x 700 x 350
Jumlah test tarikan: 1~9999( Bisa diatur, Defaulnya 100 Tarikan)
Rate Pengujian: 60 times/min
Beban : 10N(1 Pcs), 60N(1 Pcs), 20N (2 pcs)
Sesuai standar: SNI IEC 60884-1 gambar 20,SNI 04-3892.1, IEC 61010, EN 61010,VDE0620

---

For testing cord retention is for check the effectiveness of the retention of the cable of the cord anchorage . The cord anchorage is used in the normal way, clamping screws, if any, being tightened with a torque equal to two-thirds of that specified in standard. After reassembly of the specimen, the component parts shall fit snugly and it shall not be possible to push the flexible cable into the specimen to any appreciable extent. The specimen is placed in the test apparatus so that the axis of the flexible cable is vertical where it enters the specimen. - The flexible cable is then subjected 100 times to a pull of - f 50 N if the rated current is 2,5 A, - 60 N if the rated current is above 2,5 A, but not more than 16 A and the rated voltage is up to and including 250 V, - 80 N if the rated current is above 2,5 A, but not more than 16 A and the rated voltage is above 250 V, - 100 N if the rated current greater than 16 A.

Power Supply : 220V  50Hz
Dimension (mm) : 540 x 240 x 860
Application: for testing cord retention is for check the effectiveness of  the retention of the cable of the  cord anchorage
Subject : Flexible Cable
Rate of Testing : 60 times/min
Counter Display : 6 Digit
Mass : 10N=1pcs,60N=1pcs,20N=2pcs (5,6,8,10 Kg)
Pull Speed/length of Pull : 1 pull for 1 second
Number of pull : 100 times to Pull
Conforms to standard : SNI IEC 60884-1 Figure 20

Share:

Read More

Conductor Damage Checker

Aplikasi:
- memeriksa tingkat kerusakan kawat konduktor kabel
- menilai apakah desain dan struktur dari terminal klem sekrup dapat merusak kawat konduktor kabel
- memeriksa apakah terminal klem sekrup tahan stres/tarikan selama proses penggunaan normal.

---

Spesifikasi:

Model Dimensi Sumber Daya Platen Diameter Circular Radial/Diameter (mm) Kecepatan Putaran Periode Lama Uji Jarak Platen dengan Terminal(H)(mm) Load Beban(Kg) Conductor Sample Test Sesuai Standar

: CDC-A11 : 600x600x950 : AC 220V, 50 HZ : 75mm : 37.5/75 : (10 ± 2) rpm : Approximately 15 minute : 260 & 280 (± 15) : 0.3, 0.4, 0.7, 0.9, 1.4, 2.0 : 75mm longer than H : SNI IEC 60884-1 Gambar 11

Share:

Read More

Tumbling barrel test machine

Aplikasi:
Alat uji yang berfungsi untuk mensimulasikan kondisi jatuh berulang suatu part kecil atau komponen seperti steker/plug, dll.

Model: CPL-TB
Sumber daya: AC220V, 50Hz
Dimensi(mm): 650X650X1000
Ketinggian jatuh untuk sample:  500 mm
Bidang permukaan jatuh: 20 mm kayu blackwood/plywood
Kecepatan berputar: 5 rotasi/menit
Jumlah jatuh:  10x jatuh/minute
Produk/sampel uji: Steker, Plug, Soket, Komponen kecil,dll.
Sesuai standar: SNI IEC 60884-1,SNI IEC 60068-2-31

Share:

Read More

Low impact fall tester

Menguji ketahanan plug/steker terhadap tumbukan yang di berikan pada sampel uji. Hasil uji harus menunjukan tidak adanya kerusakan

Model: UT-001
Deimensi: 300 x 150 x 450
Sampel uji: plug/steker
Sesuai standar: SNI IEC 60884-1, gambar 27

---

The specimens are subjected to an impact test by means of an apparatus as shown in figure 27. The apparatus, positioned on a pad of sponge rubber 40 mm thick, is placed together with the specimens in a freezer at a temperature of (–15 ± 2) °C, for at least 16 h. At the end of this period, each specimen, in turn, is placed in the normal position of use as shown in figure 27, and a weight is allowed to fall from a height of 100 mm. The mass of the falling weight is (1 000 ± 2) g. After the test, the specimen shall show no damage within the meaning of this standard

---

Share:

Read More

Pin Abrasion Tester-02

Aplikasi:
Untuk menentukan ketahanan abrasi isolasi dari sebuah pin konektor.
SNI IEC 60884-1

---

Plug pin abrasion. to determine the abrasion resistance of insulating sleeves of plug pins by moving backwards and forwards, according to SNI IEC 60884-1 Figure 28.
The test apparatus comprises a horizontally disposed beam, which is pivoted about its center point. A short length of steel wire, 1 mm in diameter and bent into a U-shape, the base of the U being straight, is rigidly attached, at both ends, to one end of the beam, so that the straight part projects below the beam and is parallel to the axis of the beam pivot.

The plug is held by a suitable clamp in such a position that the straight part of the steel wire rests on the plug pin, perpendicular to it. The pin slopes downwards at an angle of 10° To the horizontal.
The beam is loaded so that the wire exerts a force of 4 N on the pin.

• Model : PAT-02
• Power Supply : 220V 50Hz
• Counter Display : 6 Digit
• Tingkat abrading : 30 ± 1 gerakan per menit
• Beban: 4-0.1N
• Gerak maju mundur menggores: 7 – 9 mm
• Counter Digit : 6 Digit
• Sudut pin  sampel : 10°
• Radius pin baja: 0,25 mm ± 0,02 mm
• Kecepatan menggores : 20 mm/s ± 5 mm/s
• Sesuai Standar : SNI IEC60884-1 Figure 28

---

Share:

Read More

Pin abrasion tester-01

Aplikasi:
Untuk menentukan ketahanan abrasi pin isolasi steker/plug dengan cara mensimulasikn gerakan mengkikis terhadap pin isolasi sampel uji.

---

Plug pin abrasion Tester. to determine the abrasion resistance of insulating sleeves of plug pins by moving backwards and forwards, according to SNI IEC 60884-1 Figure 28.
The test apparatus comprises a horizontally disposed beam, which is pivoted about its center point. A short length of steel wire, 1 mm in diameter and bent into a U-shape, the base of the U being straight, is rigidly attached, at both ends, to one end of the beam, so that the straight part projects below the beam and is parallel to the axis of the beam pivot.

The plug is held by a suitable clamp in such a position that the straight part of the steel wire rests on the plug pin, perpendicular to it. The pin slopes downwards at an angle of 10° To the horizontal.
The beam is loaded so that the wire exerts a force of 4 N on the pin.
Spesifikasi:

• Model : PAT-01
• Power Supply : 220V 50Hz
• Dimensi(mm) : 500 x 350 x 350
• Berat (Kg) : 20~30 Kg
• Counter Display : 6 Digit
• Tingkat abrading : 30 ± 1 gerakan per menit
• Beban: 4-0.1N
• Gerak maju mundur mengkikis: 7 – 9 mm
• Counter Digit : 6 Digit
• Sudut pin  sampel : 10°
• Radius pin baja: 0,25 mm ± 0,02 mm
• Kecepatan mengkikis: 20 mm/s ± 5 mm/s
• Sesuai Standar : SNI IEC60884-1 Figure 28

Pin abrasion tester - 01

Share:

Read More