Sharp Point Tester
Sharp Point Tester. Bagian-bagian mainan yang dapat di jangkau/diakses oleh anak dengan usia di bawah 96 bulan, tidak boleh memiliki bagian yang runcing dan berbahaya, baik dalam penggunaan normal maupun dalam penyalah penggunaan yang di duga bisa terjadi.
Alat Uji Sharp Point Tester ini digunakan sebagai penentu apakah bagian/point tertentu dari sebuah mainan dapat mangakibatkan resiko bahaya tertusuk. Sebagaimana yang disyaratkan dalam standar SNI ISO 8124-1 klausul 4.7.
Pada proses pengujian produk mainan, alat uji sharp point tester ini banyak digunakan setelah proses-proses pengujian sebelumnya. Seperti setelah uji jatuh(Drop Tester), Uji Tumbukan Bola (Drop Ball Impact Tester), uji kuat dinamik kecepatan 2m/s (Dynamic Strength Tester 2m/s) dan proses uji lainnya.
Aplikasi:
1. Menguji bagian-bagian mainan yang berpotensi runcing.
2. Mencegah bahaya tertusuk pada anak.
3. Menguji bagian-bagian mainan setelah proses uji sebelumnya seperti setelah uji jatuh,
uji kompress, uji tumbukan dan proses uji lainnya sesuai standar yang ditetapkan.
4. Sesuai klausul 5.9, gambar 21 & klausul 4.6, klausul 4.7
HUBUNGI KAMI SEGERA
Sales & Online Support:
Local CDMA: 02187745442, GSM Celluler: 081213125950 / 08990070146
http://www.alatuji-sni.com, sales@alatuji-sni.com
SHARP POINT TESTER
Accessible points on toys intended for children under 96 months, shall not be hazardous sharp points. If an accessible point fails the sharp-point test, the point shall be assessed to determine whether it presents an unreasonable risk of injury taking into account the foreseeable use and intended age grade of the toy.
Potentially sharp points shall be considered non-accessible if they lie adjacent to a surface of the test sample and any gap between the point and the adjacent surface does not exceed 0,5 mm.
Points, on toys intended for children under 36 months, whose largest cross-sectional dimension is 2 mm or less and which do not necessarily present a sharp point when tested with this tools, are considered to be potentially hazardous sharp points. They shall therefore be assessed to determine whether or not they present an unreasonable risk of injury, taking into account the foreseeable use and intended age grade of the toy.
A point tester is applied to an accessible sharp point and it is observed whether or not the point being tested penetrates a specified distance into the sharp-point tester. Depth of penetration of the point being tested determines sharpness. If the point can contact a sensing head which is recessed a distance of (0,38 ± 0,02) mm below the end cap and can move the sensing head a further (0,12 ± 0,02) mm against ( 2, 5 0−0,3 N ) force of a return spring, the point shall be identified as potentially sharp.
A point tester is applied to an accessible sharp point and it is observed whether or not the point being tested penetrates a specified distance into the sharp-point tester. Depth of penetration of the point being tested determines sharpness. If the point can contact a sensing head which is recessed a distance of (0,38 ± 0,02) mm below the end cap and can move the sensing head a further (0,12 ± 0,02) mm against ( 2, 5 0−0,3 N ) force of a return spring, the point shall be identified as potentially sharp.
