Encourage torque device

Aplikasi:
Untuk menguji ketahanan terhadap torsi dari sebuah peralatan listrik yang terdapat kabel fleksibel dengan diameter sampai dengan 10 mm yang tidak dapat dikawati ulang.

Model	:ETD-03
Suplai daya	: -
Kategori	: Kabel, plug & soket
Dimensi(mm)	: 630 x 120 x 180
Berat (Kg)	: 8 ~ 14 Kg
Produk/sample uji	: Kabel fleksibel
Sesuai standar	:SNI IEC60884-1 klausul 23.2 ( table 18), SNI IEC60335-1 klausul 25.15. (table 12 )

Share:

Read More

IPX34 Test Machine

Aplikasi:
Menguji dan memeriksa perlindungan terhadap semprotan air untuk membuktikan tingkat proteksi produk/sampel uji sesuai dengan indek proteksi IPX3 dan IPX4 "Perlindungan terhadap semprotan Air " dan . " Perlindungan terhadap percikan air"

Model: WP-IPX34
Tipe: Alat uji umum/Universal Testing Machine
Sumber daya: AC 220V, 50Hz

Sampel uji:  Pompa, Outdor Air condioner. Lampu jalan, dsb.
Sesuai standard: SNI IEC 60529 gambar/figure 4, SNI IEC 60598 klausul/clause 9.2.5, SNI IEC 60947

---

Checking the protection against water, to prove the degree of protection IPX3 and IPX4. for \”Protection against Spraying Water\” and \”Protection against Splashing Water\” tests. Oscillating tubes with spray nozzles of 0,4 mm Easy &adjustable Ring Stand for set up leveling the height Water flow rate for set the rate water supply into oscillating tube. With water filter to hold foreign material for drip nozzle. Turntable with adjustable speed Multiple of angle for rotation around sample up to 180 Speed for rotate around sample approximately 60 per second.

---

Share:

Read More

Pendulum Impact Tester

Aplikasi:
Menguji kekuatan sampel uji terhadap tumbukan/benturan.

Model: PIT-032 Suplai daya : NA Kategori : Uji kuat mekanis, uji tumbukan Dimensi(mm) : Berat (Kg) : Produk/sample uji : MCB, RCCB, Soket,dll Sesuai standar : SNI IEC 60884-1, Figures 22,23, 24 and 25, IEC 60068-2-75,IEC 60335, IEC 60065, IEC 60745, IEC 61029, IEC 60950

---

The test apparatus consists basically of a pendulum rotating at its upper end in such a way as to be kept in a vertical plane. The axis of  the pivot is at 1000㎜ above the measuring point.

Pendulum Length :1000mm ,Impact
Height :100mm,150mm,200mm,250mm,400.
Material of Construction : Aluminum Profile
Impact Energy: low energy　(not exceeding 1J) or high energy(2J and above).
Striking Element : equivalent mass: low energy:150g and 250g.
Striking Element : equivalent mass: height energy:500g.

Conforms to Standard : SNI IEC 60884-1, Figures 22,23, 24 and 25

---

Share:

Read More

Stroke durability tester

$00.00

Aplikasi: 
Menguji kekuatan pasangan steker & soket (Plug & socket outlet) dari kerusakan dalam penggunaan yang normal.

---

It can provide the test of breaking volume of socket and outlet, and mechanical action of normal operation lifespan. Using pneumatic unit as motive power, power-on time and intermittent time can be adjusted.

Model : SDT-02
Power Supply : 220V 50Hz
Dimensi(mm) : 600 x 400 x 500
Berat (Kg) : 45 ~ 50Kg
Air source : 5 ~ 8 kg/cm2
Working station : 2 Station
Terminal Type : 2 pins & 3 Pins
Counter Display : 6 Digit
Sesuai standar : SNI IEC 60884-1 Figure 16  & Clause 20

Share:

Read More

Burning Test Machine

Aplikasi: Menentukan tingkat proteksi sampel terhadap pembakaran linear/nyala api, bara api & percikan api yang dapat merusak spesimen.

Model	: FM-02
Suplai daya	: AC 220V, 50Hz
Kategori	: Flammability Tester
Dimensi(mm)	: 1100 X 600 X 800 mm
Berat (Kg)	: 75 ~ 90 Kg
Produk/sample uji	: Plastik & material lain non logam
Sesuai standar	: SNI ISO 845, ISO 9773

---

It screening procedure for comparing the relative burning behavior specimens made from plastic and other non-metallic materials, exposed to a flame ignition source of 50W or 500W nominal power. These test methods determine the linear burning rate and the after flame/afterglow times, as well as the damaged length of specimens. They are applicable to solid and cellular materials that have an apparent density of not less than 250kg/m3, determined in accordance with ISO845. Then do not apply to materials that shrink away from the applied flame without ignition; ISO9773 should be used for thin flexible materials.

• Timing device with four digit 9999X0.1s
• Automatic Carried unit device for movement of needle
• Smoke/fume exhaust Ø 113 mm incorporated in chamber
• Black painted cabinet more than 0,5 m (2.05 m )
• Gas flow regulating valve for flame height, manual adjustment
• Gas pressure regulator and safety control
• Needle burner tilt to 45° from the vertical, manual adjustment
• Ring Stand easy to grip the sample
• Preset time of testing; 5s, 10s, 20s, 30s, 60s, 120
• Lighting inside the cabinet and fan control
• Easy manual panel control with push button lamp
• Timer Display for record data time burning, time flame
• Time for temperature to increase (100° to 700°; 23,5 s)
• Combustion angle 0 , 20 , 45
• Height of flame Up to 125 mm
• Gas Supply Propane min 95% purity

---

Share:

Read More

Mechanical shock tester

$00.00

Mechanical Shock Tester dirancang untuk menguji MCB, ELCBs . Tujuannya menguji ketahanan sample uji terhadap guncangan mekanik sesuai standar IEC 60898.

Sampel dipasan pada bidang plat vertikal. Ketinggian pemasangan sampel dapat disesuaikan hingga 250mm (180mm jarak normal). Jarak horizontal pelat vertikal dapt disesuaikan dan diputar antara 150m sampai 250mm / (biasanya 200). Menggunakan pegas dengan kekuatan 25N / mm konstan. Penggerak motor untuk mekasnisme menjatuhkan dengn tinggi 40mm.dengan kecepatan yang dapat disesuaikan. Jumlah drop/jatuh dicatat/diatur  dengan  Digital Counter.

Model:RC-MA2
Sumber daya: AC220V, 50Hz
Dimensi: 600 x 350 x 350
Sample Uji:  RCCB, MCB
Sesuai standar- SNI IEC 61008-1 gambar 11,IEC 60898. 

Share:

Read More

Test Wire 1mm

Test Wire 1mm 

Test Wire/Test Kawat Ø 1 mm digunakan untuk memferifikasi perlindungan terhadap akses ke bagian berbahaya. Hal ini juga digunakan untuk memferifikasi perlindungan terhadap akses dengan kawat.

Model	: IP-1 & IP 2.5
Suplai daya:	: AC 220V, 50Hz
Kategori	: IP, Pin & Probe
Dimensi	:
Berat	: 0,2 Kg
Sampel uji	: Umum
Sesuai standar	: SNI IEC 61032 test probe D, SNI  IEC529 untuk IP4

Share:

Read More

Electric Iron Drop Tester

Aplikasi: Untuk menentukan kekuatan mekanik setrika listrik dengan cara di jatuhkan secara berulang dengan ketinggian tertertu. Bidang alas jatuh berupa  pelat baja dengan ketebalan tertentu sesuai standar.

Model	: DRT-1IR
Suplai daya	: AC 220V, 50Hz
Kategori	: Alat uji kuat mekanis
Dimensi(mm)	: 600 x 400 x 820
Berat (Kg)	: 45 ~ 60 Kg
Produk/sample uji	: Setrika listrik
Sesuai standar	: SNI IEC60335-2-3 klausul 21,101 .

Order

---

Electric Iron Drop Tester:
To determine the mechanical strength of electric irons by repeated drop onto a steel plate according to IEC60335-2-3 clause 21.101. The electric iron is operated under normal operation at rated power input and, except for cordless irons, the soleplate temperature is maintained under these conditions throughout the test.

• Steel plate with thick 15mm , 
• Mass at least 15 kg, rigidly supported, 
• Lifting device with radial cam for a slow lifting of the specimen for 40 mm, for a sudden release for a free fall and for a rest time on the steel plate of 15% of the test duration,
• 20 drops per minute (adjustable),
• With voltmeter AC 250 V, current meter 15A, fuses and socket-outlet for the specimen, for connection to AC 220V 50Hz.

Share:

Read More

Plug Flexing Machine

Aplikasi:

Model	:
Suplai daya	: AC 220V, 50Hz
Kategori	: Alat uji.....
Dimensi(mm)	: x x
Berat (Kg)	: 0 ~ 0 Kg
Produk/sample uji	:
Sesuai standar	: SNI IEC

Order
Descriptions...

Share:

Read More